Grouting Equipment

Scroll down to find information about Grouting Equipment for the water well industry.

The leader in water-well and geothermal grouting equipment. Performance and reliability are the hallmarks of a Geo-Loop pump. We've thought of every minute detail you would need to get the job done quickly and even have created bundled trailer packages that you can just back your truck up to and you're off and going in a snap! Each and every feature on our pumps is carefully designed to be in the exact spot any operator would want it to be, making it a pleasure to use. We have a wide variety of grouting equipment and accessories - designed to fit every budget and job requirement. We ship world-wide - check our website for more information.

kwik-ZIP®

Inert Centralizer Systems for the Drilling Industry

3 Barnard St.

Bunbury

Western Australia 6230

TEL: +61 8 9725 4678
FAX: +61 8 9725 4700
MOBILE: +61 8 0408 932 002

EMAIL: jason.linaker@kwikzip.com
WEB: www.kwikZIP.com

Both ASTM D 5092: Ground Water Monitor Well Design, and ANSI / AWWA A100-97 Water Wells require centralizers to be used on the casing and the screen “…(typically every 20 to 30 ft [6 to 9m])…” prior to installation of gravel pack. Centralizers are also necessary to obtain a uniform annular thickness prior to carrying out the grouting procedures prescribed by ANSI / AWWA A100-97 Water Wells. In addition to this, many regulations require centralizers to be manufactured of inert material to avoid corrosion problems and to ensure that water samples extracted from monitor wells are not contaminated.

The kwik-ZIP® Inert Centralizer System was invented by Drillers to perfectly fulfill these requirements. The injection molded segments quickly fit together to satisfy a wide range of diameter requirements and provide various annular thickness options. As well as Water Wells and Monitoring Wells the kwik-ZIP® Centralizer System is also widely used in CBM, conventional vertical Oil & Gas, Soil Stabilisation, and Deep Injection Well applications. While the product is manufactured from high-grade engineering polymers, the injection molding process allows for significant cost advantages over alternative centralizers. Please visit our website for more information.

♦